door. Sunday , June 04th , 2017 - 08:19:16 AM
Can you fit an opener to the garage door you already have? It can be possible but it will depend on the type of door, its quality and the tracks. The best thing to do in this situation is to contact a professional installer and get them to have a look, many will do this as part of a free quote. If it cannot be done they can give you options on a new door.
To give a neat finish to the vertical edges of the door and to protect the edges of the panels, a narrow strip of timber is fastened to the door by a tongue and groove, or by gluing and pinning. This is known as a lipping. It is essential on external doors to prevent water getting under the facings and makes it easier to keep a neat edge when you have to plane off a little to make the door fit. On veneered doors the lipping is the same timber as the face veneer.
The two basic styles of wooden doors are the roll up and the tilt up door. The roll up door provides a tight fit between the door and the door opening because it is installed behind the door opening. Roll up doors have four or more horizontal sections that are hinged together and roll on a track to open. Tilt up doors are installed inside the door opening, and the entire panel tilts out and then is pushed up to open. Tilt doors are a cost-saving option and are typically up to 35% cheaper than a roll up door.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does All That claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.